Spetsnaz upgrade?

-Shims
-Bushings
-Spring
-Lipoly

and your good to go to battle!

options mo na lang yung ibang idadagdag mo jan na upgrade eto lang I think pinakaimportante unless may iba silang ippost sa inquiry mo na mas importante.

Papadhie wrote:

-Shims
-Bushings
-Spring
-Lipoly

and your good to go to battle!

options mo na lang yung ibang idadagdag mo jan na upgrade eto lang I think pinakaimportante unless may iba silang ippost sa inquiry mo na mas importante.

Dagdag mo narin kong may pera ka pa ng di ka bukas sara ng gearbox mo.

-steel Bushings( CA/ Cyclone /Systema)
-Spring (PDI 190/M130)
-Metal spring guide with bearing
-Lipoly
-JG RED PISTON BODY

is it for hi-rof or hi fps set-up?

_MUDflap_ wrote:

Woooh!!! ... Anu po ung mga parts na yan??? He3... Its like alien language for me...
He3... Mga magkano po magagastos ko jan???...Hmmmm... ...
Anu po ba mas maganda??? High ROF or High FPS??

THANKS MGA SIRS!!!

MUDflap, IMHO, basic upgrade ka muna, maganda nayang baril mo internals,this are the only things you need at the moment;

Metal Shims P 60
CA Metal Bushings P 450
Spring @ 450 FPS Set up PDI 190/M130 P 600
Lipoly battery P1,200
P2,850

Kailangan mo mag invest sa magandang battery to maximize you're gun.

MGA SIR PAHABOL NA RIN NG TANONG.... LIPOLY READY NA BA ANG SPETZ NA PLASTIC VERSION..... THANKS?.... I'M PLANNING TO UPGRADE MY SPETZ EH...

Hinda pa kasi platic bushing palang, you need the basic upgrade level one which needs to replace metal shims, metal bushing. Mangyayari niyan ay mawoworn out premature yong plastic bushing then, susonod na ma miss align gears mo to the possibility of breaking a tooth or a shaft. worst is masira mo casing gearbox mo.

This is also true to the AK Tactical plastic reciever.

Add ko narin; The plastic reciever AK's are very good once upgraded, they are very light and playable in field, para mas gomaang pa, tangalin mo yong pabigat na bakal na naka insert kong meron.

hope this helps.

garuda wrote:

Hinda pa kasi platic bushing palang, you need the basic upgrade level one which needs to replace metal shims, metal bushing. Mangyayari niyan ay mawoworn out premature yong plastic bushing then, susonod na ma miss align gears mo to the possibility of breaking a tooth or a shaft. worst is masira mo casing gearbox mo.

+1 to sir garuda

Tingin ko hwag muna upgrade. hayaan mo muna masira.

Pero pag nag upgrade ka need mo to sa spetz. HI ROF na set up

1. metal bushings (7mm na noe yung bago spetz)
2. shims
3. deepfire brass AK airseal nozzle
4. deepfire piston body (full titanium tooth)
5. Tight Barrel
6. Techpro cylinder head
7. Techpro Piston head
8. Spring guide with bearing (brass)
9. PDI 190 spring/ SP 130
10. 20c- 25c lipo bat
9. Maghanda ka na ng spare na pinion gear (guarder) and hop up rubber (guarder)

1st option
1. JG red M93 Motor or 5ku motor or Xyclone motor (hi speed)


2nd option
1. 13:1 hi speed gear
2. ICS turbo 3000 motor (hi- torque)



Ayos na yan mga tsip.

Yes!

Palitan na talaga lahat ng laman loob nyan. Frame lang ititira mo dyan, Magastos talaga pag Hi- ROF set up.

Sa akin nga bago ko umalis ng Baguio (April 2009) bago motor ko (eg1000), 13:1 hi- speed gear, Techpro piston body, Bagong kabit din yung piston head at cylinder head. Now, iba na naman set up ko. Mlakas talaga sa parts yan.

The Slayer wrote:

Tingin ko hwag muna upgrade. hayaan mo muna masira.

Pero pag nag upgrade ka need mo to sa spetz. HI ROF na set up

1. metal bushings (7mm na noe yung bago spetz)
2. shims
3. deepfire brass AK airseal nozzle
4. deepfire piston body (full titanium tooth)
5. Tight Barrel
6. Techpro cylinder head
7. Techpro Piston head
8. Spring guide with bearing (brass)
9. PDI 190 spring/ SP 130
10. 20c- 25c lipo bat
9. Maghanda ka na ng spare na pinion gear (guarder) and hop up rubber (guarder)

1st option
1. JG red M93 Motor or 5ku motor or Xyclone motor (hi speed)


2nd option
1. 13:1 hi speed gear
2. ICS turbo 3000 motor (hi- torque)



Ayos na yan mga tsip.

master slayer, ilan fps mo po diyan, stock barrel?

Estimate Lang ha:

FPS- 440 @ ics.20g
ROF- 1600- 1900

Ang hina ano? nakaka addict yang ganyang set up. yung akin dinowgrade ko uli spring to PDI 170 kaya 400 FPS. kasi maglalaro ako bukas dyan kung walang bagyo. hehehe

Final set- up ng spetz ko:

Base Gun- JG na Plastic version

1. TU lightning speed helical gears
2. Deep fire Piston body (full tooth)
3. TU double o- ring piston head
4. Techpro cylinder head
5. JBU cylinder body
6. CA airseal nozzle
7. CA metal bushing
8. PDI 190 spring
9. JG red motor (hi torque)
10. TU 6.01MM I.D. tight barrel X 300 mm length
11. TU Lipo 2500MAH 15c

Yung sealing mods ni Malloski using RTV ang ginawa dun instead of teflon mod.

Yung barrel medyo mahaba, kaya gumamit ako ng flash hider na amplifier


result: 449 fps @ 1500 + ROF (0.20 ICS bbs)

ok na yung ROF na yan, kasi mahirap magkamot during speedball tourney. And yun din ang dahilan kaya nasusugod ng kalaban while "nagkakamot". hehehe

The Slayer wrote:

Final set- up ng spetz ko:

Base Gun- JG na Plastic version

1. TU lightning speed helical gears
2. Deep fire Piston body (full tooth)
3. TU double o- ring piston head
4. Techpro cylinder head
5. JBU cylinder body
6. CA airseal nozzle
7. CA metal bushing
8. PDI 190 spring
9. JG red motor (hi torque)
10. TU 6.01MM I.D. tight barrel X 300 mm length
11. TU Lipo 2500MAH 15c

Yung sealing mods ni Malloski using RTV ang ginawa dun instead of teflon mod.

Yung barrel medyo mahaba, kaya gumamit ako ng flash hider na amplifier


result: 449 fps @ 1500 + ROF (0.20 ICS bbs)

ok na yung ROF na yan, kasi mahirap magkamot during speedball tourney. And yun din ang dahilan kaya nasusugod ng kalaban while "nagkakamot". hehehe

great set-up sir! kumusta po iyong TU tight barrel? i heard it's cheap... kagulat... pero some reviews said that it isn't worth it... naninira daw ito ng hop rubber. kailangan pa ng kaunting mod.

feedback naman po sir? thanks!

T.U. tight barrel - ah yes.... medyo matatalim yung nilalagyan ng hop rubber.

yung gumawa kasi ng beng beng ko ay yung gunsmith ng tuguegarao airsoft group. may mods na ginawa, kinayod nila yung mga matatlim . fyi, sila yung isa sa kasama sa national speedball tourney s cebu and sa NCR sila nag qualify.... hehehe and besides, lahat ng barrel nila ay T.U. 6.01 I.D tight.

Price is cheaper- P1,100- 300 mm length.

All you have to do is look for a gunsmith na ganun din ang set up ng beng beng para d ka mapasubo.... ok. meri xmas bro.