aeg accuracy

mga sir.. ask ko lang po kung anong dapat i-upgrade para mas maging accurate ang aeg ko. napansin ko po kasi na habang lumuluma ay nagiging inconsistent po ang accuracy ng baril ko. I'm not into the strength of the gun, just the accuracy po. MP5 Navy po sya. Thanks very much!

tight barrel...

tama si sir abis...tight barrel...linisan nyo sir ung barrel nyo pakitabin nyo pa kung gsto nyo gmit ang metal polisher ingat lng baka mapuno ung barrel nyo ng metal polisher umabot hanggang hop up rubber lagot paktay na..heard it from the veterans...

kakabasa ko sa internet sir,

tight barrel and cylinder upgrade(d ko sure nabasa ko lng po)

Linisan mo lang barrel mo. Tight Barrel will only make a small difference. It will depend on consistency of gun fps

Thanks mga sir!! Malinisan nga mamyang gabi. Pwede bang baby oil instead of silicone oil na panglinis?

nope i dnt know y eh?nkta ku lng gmit nila metal polisher for the inner barrel only hnd sa buong baril

don't use any oil for the inside of the barrel. use metal polisher para kuminis.

Okay.. maraming salamat po!!

More power!

Tupa wrote:

don't use any oil for the inside of the barrel. use metal polisher para kuminis.

pano sir pag teflon coated? di na siguro pwede gamitan ng metal polisher noh? baka maubos ung coating..

most of our barrels are teflon coated....i dont recommend using metal polish,metal polisher contains granules with fine grits,just like sand paper.but realy finer.i use silicon oil,clean white cloth.but not ot much silicon oil,if a great amount of silicon oil reaches your hop up it would definitely affect its performance.if you have observed,silicon oil speads through the surface.but this is mearly my opinion...what you this sir's and maam's

Fullmetal wrote:

most of our barrels are teflon coated....i dont recommend using metal polish,metal polisher contains granules with fine grits,just like sand paper.but realy finer.i use silicon oil,clean white cloth.but not ot much silicon oil,if a great amount of silicon oil reaches your hop up it would definitely affect its performance.if you have observed,silicon oil speads through the surface.but this is mearly my opinion...what you this sir's and maam's

> never use oil to clean your barrel,, oil attracts dust or even dirt, w/c causes clogging in your barrels (especially in tight ones)
> and i agree with sir fullmetal, dont use granule containing polishers, this will cause damage to the teflon coating of your barrel
> according to the BARREL GURU sir EdGI, you can use alcohol applied on a cotton cloth to clean your barrel. alcohol has drying effects, so the solution dries on its own and leaves the barrel smooth and shinny, it also prevents moisture from accumulating in your barrel after cleaning.
> yup, EdGI!!!